5.0(65+ reviews)
    24/7 emergency commercial response

    Commercial HVAC for Hudson Yards & the West Side

    Com+ Mechanical keeps Class A towers, mixed-use developments, and ground-floor retail across Hudson Yards, Manhattan West, and West Chelsea running cold in summer and warm in winter. Chillers, VRF, RTUs, and controls — one accountable vendor.

    HVAC Challenges Common to West Side Commercial Buildings

    Curtain-wall solar load and uneven tenant comfort

    Floor-to-ceiling glass on West Side towers drives heavy west- and south-facing solar gain. Without balanced air and water distribution, perimeter zones overheat while interior cores run cold, generating constant tenant complaints during fit-out and seasonal swings.

    Central chiller plant inefficiency and short-cycling

    Large central plants serving high-rise towers lose efficiency when chilled-water reset, condenser water, and sequencing aren't tuned to actual load. The result is higher energy spend, nuisance alarms, and accelerated wear on compressors and pumps.

    Supplemental cooling sprawl from dense tenant fit-outs

    Trading floors, data closets, and IDF/MDF rooms in Class A space add unplanned heat load. Mismatched or unmaintained supplemental and computer-room cooling units lead to overheating, condensation, and equipment risk in critical spaces.

    Mixed-use load conflicts between residential, office, and retail

    In buildings stacking residential, office, hospitality, and ground-floor retail, a single VRF or hydronic system serving conflicting schedules and setpoints causes simultaneous heating-and-cooling waste and tenant disputes over comfort and billing.

    BMS and controls drift after handover

    Newer buildings are commissioned to spec, but sequences drift as tenants move in, sensors fail, and overrides accumulate. Buildings quietly fall out of optimized operation — masking faults and inflating energy use until a failure forces attention.

    Local Law 97 emissions exposure on large buildings

    Most buildings over 25,000 sq ft face carbon caps that tighten sharply in 2030. Inefficient HVAC operation is a primary driver of emissions intensity, putting owners at risk of annual penalties unless systems are tuned, electrified, or upgraded.

    Commercial HVAC Built for the West Side's Newest Building Stock

    Hudson Yards and the surrounding West Side are among the youngest large-scale commercial districts in Manhattan — Class A office towers along Tenth and Eleventh Avenues, the Manhattan West and Hudson Yards mega-developments, residential and hospitality high-rises, and the gallery-and-showroom stretch of West Chelsea where former industrial lofts now house offices and retail. The mechanical systems here skew modern and high-capacity: large central chiller plants, water-cooled and air-cooled systems serving curtain-wall towers, VRF and heat-recovery systems in mixed-use and residential floors, dedicated outdoor air systems (DOAS) for ventilation, and packaged rooftop units (RTUs) on lower podiums and retail boxes. Tenant fit-outs across these floors mean constant supplemental cooling, computer-room and IDF/MDF cooling, and tight coordination with base-building BMS. Com+ Mechanical serves this district end to end: scheduled maintenance, service and repair, controls integration, indoor air quality, and 24/7 emergency response — so property managers, building owners, and facilities teams have a single accountable mechanical partner instead of a patchwork of trades.

    Commercial HVAC Services in Hudson Yards

    Chiller plant service & repair — air-cooled and water-cooled centrifugal, screw, and scroll systems
    VRF / VRV and heat-recovery system service for mixed-use and residential floors
    Rooftop unit (RTU) and packaged system maintenance for podiums and retail
    Boiler, hydronic, and steam heating service for tenant and base-building loads
    Building automation & controls (BAS/BMS) integration, troubleshooting, and optimization
    Preventive maintenance agreements scoped per building and tenant SLA
    Indoor air quality, ventilation, DOAS, and filtration upgrades
    24/7 emergency repair and after-hours service for occupied buildings

    Why West Side Property Teams Work With Com+

    Local responsiveness across Hudson Yards, Manhattan West, and West Chelsea for fast on-site dispatch
    Single-vendor coverage of chillers, VRF, RTUs, boilers, controls, and IAQ — no juggling multiple trades
    Experience with the modern, high-capacity systems found in Class A and mixed-use towers
    Maintenance programs scoped to your building and tenant SLAs, not a generic checklist
    Controls and BMS expertise to keep commissioned sequences performing as designed
    24/7 emergency support to protect occupied, revenue-generating space

    Our Simple Process

    From call to comfort in 4 easy steps

    1

    Site Assessment & System Inventory

    We walk the building with your facilities team, inventory the chiller plant, air- and water-side equipment, VRF, RTUs, boilers, and controls, and document condition, access, and critical spaces.

    2

    Scope & Custom Proposal

    We deliver a tailored proposal — service, a preventive maintenance agreement, or emergency coverage — scoped to your equipment, tenant SLAs, and Local Law 97 considerations.

    3

    Onboarding & Baseline

    We establish a maintenance schedule, baseline equipment performance, set BMS/BAS alarm priorities, and align response expectations with property management and tenants.

    4

    Ongoing Service & Reporting

    We perform scheduled maintenance, respond to service and emergency calls, and provide documented reporting so you can track equipment health, work history, and efficiency over time.

    Types of Systems We Install

    Central Chiller Plants

    Large air-cooled and water-cooled chiller plants — centrifugal, screw, and scroll — serving the chilled-water loops of Class A office and mixed-use towers along the West Side.

    • Centrifugal, screw & scroll chillers
    • Cooling towers & condenser water systems
    • Primary/secondary pumping & chilled-water reset
    • Plant sequencing and efficiency optimization

    VRF / Heat-Recovery Systems

    Variable refrigerant flow and heat-recovery systems common in newer mixed-use, residential, and hospitality floors where zones run on different schedules and setpoints.

    • VRF/VRV outdoor & indoor units
    • Simultaneous heating and cooling recovery
    • Zoning and controls integration
    • Refrigerant management and leak service

    Rooftop Units & Packaged Systems

    Packaged RTUs and DOAS serving lower podiums, retail boxes, and dedicated ventilation across the district's ground-floor and mid-rise commercial space.

    • Packaged RTUs and split systems
    • Dedicated outdoor air systems (DOAS)
    • Economizers and ventilation controls
    • Filtration and IAQ upgrades

    Why Choose Com+ Mechanical

    Commercial & B2B Focus

    We work exclusively with property managers, building owners, and facilities teams on commercial systems — not residential service calls.

    West Side Coverage

    We serve Hudson Yards and the wider West Side of Manhattan, with dispatch geared to the district's office, mixed-use, and retail buildings.

    Full-Portfolio Capability

    From central chiller plants to rooftop units and building controls, we cover the full mechanical scope under one contract and one point of accountability.

    Built for Occupied Buildings

    After-hours and 24/7 emergency response means we can work around tenant operations and protect uptime in revenue-generating space.

    Transparent Pricing

    No fees. No surprises. Just honest service.

    Service & Repair

    Custom Quote

    On-demand diagnostics and repair for chillers, VRF, RTUs, boilers, and controls across your building.

    • Troubleshooting and diagnostics
    • Repairs and component replacement
    • Refrigerant and hydronic service
    • Controls and BMS fault resolution
    • Documented service reporting
    Get Free Quote
    Most Popular

    Preventive Maintenance Agreement

    Custom Quote

    A scheduled maintenance program scoped to your equipment and tenant SLAs to maximize uptime and efficiency.

    • Scheduled multi-point inspections
    • Filter, coil, and component servicing
    • Performance baselining and tuning
    • Priority emergency response
    • Compliance-minded efficiency tracking
    • Quarterly or seasonal reporting
    Get Free Quote

    24/7 Emergency

    Custom Quote

    Round-the-clock emergency response to protect occupied, revenue-generating buildings.

    • 24/7/365 phone line
    • After-hours and weekend dispatch
    • Rapid on-site response
    • Critical-space cooling support
    • Temporary and permanent fixes
    Get Free Quote

    All pricing is provided as a custom quote after an on-site assessment of your building's systems, access, and service requirements.

    Own a Commercial Property?

    Business+ plans start at $499/year — includes 2 rtu tune-ups, 10% off all services, and priority scheduling.

    No ContractsSatisfaction Guarantee
    View Business+ Plans

    Equipment & Brands We Service

    Factory-trained technicians for all major HVAC manufacturers

    Trane logo
    TraneThe Apple of HVACFactory Authorized
    Carrier logo
    CarrierThe OG of Air ConditioningFactory Authorized
    Lennox logo
    LennoxPremium High-EfficiencyFactory Authorized
    American Standard logo
    American StandardTrane's Smarter TwinPreferred Partner
    Rheem logo
    RheemReliable & Drama-FreePreferred Partner
    Bryant logo
    BryantCarrier's Quieter SiblingCertified
    Goodman logo
    GoodmanHonest ValueCertified
    Ruud logo
    RuudRheem's Reliable TwinCertified
    Mitsubishi Electric logo
    Mitsubishi ElectricGold Standard for DuctlessFactory Authorized
    Daikin logo
    DaikinWorld's Largest HVAC ManufacturerFactory Authorized
    Bosch logo
    BoschGerman Engineering ExcellencePreferred Partner
    LG logo
    LGSurprisingly LegitPreferred Partner

    Don't see your brand? We service all major manufacturers! Call us to confirm.

    Proudly Serving Nassau County

    Fast, reliable service in your neighborhood

    Frequently Asked Questions

    Get answers to common questions about our services

    Do you cover buildings throughout Hudson Yards and the West Side of Manhattan?

    Yes. We service commercial buildings across Hudson Yards, Manhattan West, West Chelsea, and the surrounding West Side — Class A office towers, mixed-use and residential high-rises, hospitality, and ground-floor retail. Call (332) 600-4640 to confirm coverage for your address.

    How fast can you respond to an emergency in an occupied tower?

    We offer 24/7 emergency dispatch and prioritize occupied, revenue-generating buildings. Our central West Side service area is geared toward fast on-site response.

    Can you support a multi-building portfolio under one agreement?

    Yes. We work with property managers and owners who operate multiple buildings and can structure a single preventive maintenance agreement with consistent scope, reporting, and a single point of contact across your portfolio.

    How does Com+ help with Local Law 97 compliance?

    Inefficient HVAC operation is one of the largest drivers of a building's carbon emissions. We tune chiller plants and controls, correct drifted sequences, and identify efficiency and electrification upgrades that reduce emissions intensity ahead of the tighter 2030 caps. We are an HVAC contractor, not an energy-compliance filer — we coordinate with your energy consultant or sustainability team on benchmarking and reporting.

    What types of systems do you service in these buildings?

    The full range found on the West Side: central air-cooled and water-cooled chiller plants, VRF and heat-recovery systems, packaged rooftop units, boilers and hydronic/steam heating, DOAS and ventilation, supplemental and computer-room cooling, and building automation systems.

    Can you work around our tenants and base-building operations?

    Yes. We schedule maintenance and larger work for after-hours and weekends where needed, coordinate with property management and base-building engineers, and plan around tenant operations to minimize disruption in occupied space.

    Love Our Service? Share Your Experience!

    Manage a building we've serviced? A quick review helps other NYC property managers and building owners find us.

    5 stars • 500+ reviews

    Most Requested Services

    Our businesses' top picks for heating, cooling & air quality

    additional

    Building Automation Systems

    Learn More
    additional

    Commercial HVAC Maintenance

    Learn More
    additional

    Commercial Ductwork Services

    Learn More
    additional

    RTU Preventive Maintenance

    Learn More
    additional

    Commercial HVAC Service Contracts

    Learn More

    Get a Mechanical Partner for Your West Side Building

    Whether you manage a Class A tower at Hudson Yards, a mixed-use high-rise on the West Side, or retail and office space in West Chelsea, Com+ Mechanical delivers single-vendor HVAC coverage with local responsiveness and 24/7 emergency support. Schedule a site assessment and get a custom proposal scoped to your building.

    Call (332) 600-4640