Staten Island runs on rooftop-heavy, low-rise commercial buildings — Hylan Boulevard and Forest Avenue retail strips, the West Shore industrial and warehouse corridor, St. George office and civic space near the ferry, and the borough's medical and institutional campuses. Com+ Mechanical is the single commercial HVAC partner that covers all of it: packaged rooftop units, split and VRF systems, boilers, controls and ventilation, with preventive maintenance, repairs, retrofits and 24/7 emergency response for property managers, building owners and facilities teams across Richmond County.
Much of Staten Island's retail along Hylan Boulevard, Forest Avenue and Richmond Avenue runs on packaged RTUs that are well past their service life. Single-stage compressors and fouled coils run long, drive up energy use, and fail on the hottest and coldest days. We diagnose root cause and give a clear repair-vs-replace path with efficiency and Local Law 97 emissions impact spelled out.
West Shore / Bloomfield industrial and distribution buildings have high ceilings, big door openings and process loads that defeat undersized or poorly balanced equipment. Inadequate makeup air, unbalanced exhaust and stratified heat are common — we assess the whole air picture, not just the unit that's complaining.
Staten Island's waterfront and exposed sites push salt air, wind and storm exposure onto rooftop and ground-mounted equipment. Corroded coils, cabinets, curbs and condensate pans show up faster here. Documented PM catches corrosion and drainage issues before they cause interior damage or a failure.
St. George, Stapleton/Bay Street and the borough's older commercial and institutional buildings still run hot-water and steam boilers with perimeter heat. Inefficient firing, failed controls and uneven distribution drive tenant complaints and fuel spend — we service, retune and retrofit these plants and scope replacements when the math favors it.
Staten Island's hospital, medical-office, school and civic buildings can't tolerate downtime or poor ventilation. Equipment redundancy, ventilation rates and filtration all matter more here, and a single failure has real consequences. We build PM and response around those stricter requirements.
Property and asset managers often juggle a different contractor for each storefront, office and industrial building — inconsistent paperwork and no clear view of which equipment is about to fail. We consolidate the whole borough portfolio under one tagged asset list, one preventive schedule and one point of contact.
Staten Island's commercial real estate looks nothing like Manhattan's. Instead of central plants in high-rise mechanical rooms, most of the borough's heating and cooling load sits on the roof: gas/electric and electric packaged rooftop units over big-box and strip retail along Hylan Boulevard, Forest Avenue, Richmond Avenue and the Staten Island Mall trade area; split systems and light-commercial equipment in storefronts and professional offices; and large-tonnage RTUs, makeup-air and exhaust on the warehouses, flex space and distribution buildings in the West Shore / Bloomfield industrial corridor near the West Shore Expressway. Add the office and civic buildings around St. George and the Stapleton/Bay Street waterfront, plus medical, school and institutional facilities with stricter uptime and air-quality requirements, and you get a mix that demands a contractor comfortable on every system type — not just one. Com+ Mechanical serves all of it as one accountable vendor: a tagged asset list per building, a documented preventive schedule sized to each unit, root-cause repairs, capital-planning reports that separate CapEx from OpEx, and the same crews for routine PM, break-fix and after-hours emergencies. Because Staten Island is part of New York City, covered buildings here fall under the same NYC energy and emissions rules — including Local Law 97 — so we frame equipment and retrofit decisions around emissions exposure and operating cost, not just first cost, and coordinate roof access, COIs and tenant notice the way Staten Island property teams actually operate.
From call to comfort in 4 easy steps
We confirm access, safety and equipment details, then get a technician to the roof, mechanical room or tenant space to assess the system and the real conditions — curb, access path, electrical, gas and controls.
We isolate the actual fault rather than resetting the unit, then explain it in plain terms with a clear written scope and Custom Quote for parts and labor before any work proceeds.
Our crews execute the work — break-fix repair, planned retrofit, or full changeout — coordinating crane and rigging, tenant notice and after-hours timing to keep the building running.
We document findings and, for agreement holders, fold the asset into a tagged Staten Island portfolio list with a preventive schedule and per-building reporting to forecast the next replacement.
The dominant system across Staten Island's low-rise retail, office and industrial buildings — gas/electric, electric and heat-pump packaged units carrying the full heating and cooling load from the roof.
Storefront, professional-office and small-tenant systems along Forest Avenue, Hylan Boulevard and the borough's commercial strips, where a full rooftop package isn't warranted.
Hot-water and steam boiler plants in Staten Island's older mixed-use, office and institutional buildings around St. George, Stapleton and the borough's established corridors.
Our work centers on exactly what the borough has — rooftop-dominated retail, West Shore industrial and flex space, St. George office and civic buildings, and institutional campuses — not a one-size template.
One tagged asset list, one preventive schedule and one point of contact across your entire Staten Island portfolio replaces a binder full of contractor phone numbers and mismatched paperwork.
Staten Island is still New York City. We coordinate permits and inspections for covered work and frame retrofit decisions around Local Law 97 emissions exposure and operating cost, not just first cost.
When a rooftop unit, boiler or chiller goes down, you reach a real commercial dispatcher — no call center — with agreement holders dispatched first across Richmond County.
No fees. No surprises. Just honest service.
On-demand diagnostics and repair for rooftop units, splits, boilers, VRF and controls across Staten Island, scoped per call.
Scheduled PM sized to each building's equipment, with a tagged asset list and documented per-building reporting — the lowest-surprise way to run a Staten Island portfolio.
Rapid-response dispatch when commercial equipment goes down on Staten Island — any hour, any day, across Richmond County.
Pricing shown is a structure, not a quote. Final pricing is confirmed in writing after an on-site Staten Island assessment, scoped to equipment count, tonnage, configuration, fuel type, access and controls.
Business+ plans start at $499/year — includes 2 rtu tune-ups, 10% off all services, and priority scheduling.
Factory-trained technicians for all major HVAC manufacturers









Don't see your brand? We service all major manufacturers! Call us to confirm.
Fast, reliable service in your neighborhood
Get answers to common questions about our services
We dispatch across Richmond County and prioritize preventive-maintenance agreement holders for the fastest response. Exact response time depends on the site, time of day and the nature of the failure, and we confirm dispatch with a real commercial dispatcher rather than a call center.
Yes. We work the full range of Staten Island commercial stock — large-tonnage RTUs, makeup-air and exhaust on West Shore / Bloomfield warehouse, flex and distribution buildings; packaged units over big-box and strip retail along Hylan Boulevard, Forest Avenue, Richmond Avenue and the Staten Island Mall trade area; split systems in smaller storefronts; and boilers and controls in office, civic and institutional buildings.
That's our core model. We consolidate every covered building under one tagged asset list, one preventive schedule sized to each system, consolidated per-building reporting and a single point of contact — so you stop juggling a different contractor for each storefront, office and industrial site.
Staten Island is part of New York City, so covered buildings in the borough fall under the same NYC rules, including Local Law 97 emissions limits, the same as the other boroughs. We don't provide legal or accounting advice, but we frame equipment and retrofit decisions around their effect on energy use and emissions exposure, and can specify higher-efficiency or electrified systems with that goal in mind.
For covered scopes of work in New York City, mechanical work generally requires DOB filing, permits and applicable special inspections, and Staten Island is no exception. We coordinate that as part of the project.
We service packaged rooftop units, split and ductless systems, VRF/VRV, air-cooled and water-cooled chillers, and hot-water and steam boilers of essentially every commercial make and tonnage found on Staten Island. Brands we commonly service include Carrier, Trane, York, Daikin Applied, AAON, Lennox Commercial, Rheem Commercial and Mitsubishi Electric — listing a manufacturer reflects equipment we service, not a manufacturer credential or authorization claim.
Manage a building we've serviced? A quick review helps other NYC property managers and building owners find us.
5 stars • 500+ reviews
Our businesses' top picks for heating, cooling & air quality
Equipment services, industry expertise, NYC compliance, and the metro areas we cover.
From a single rooftop unit on a Hylan Boulevard storefront to a multi-building portfolio across the West Shore and St. George, talk to a real commercial HVAC dispatcher who knows Richmond County — no call centers, no runaround. Call (332) 600-4640 to schedule a site assessment.
Request a Site Assessment